Skip to content
$10 back with your first samples order!
$10 back with your first samples order!
$10 back with your first samples order!
$10 back with your first samples order!
$10 back with your first samples order!
$10 back with your first samples order!
$10 back with your first samples order!
$10 back with your first samples order!
Bargain Blinds & Curtains

How to install temporary paper blinds - Inside fit

Follow this method to install temporary paper blinds for your windows.

What you need

  • Tape measure Tape measure
  • Pair of scissors Pair of scissors
Download guide

  1. Getting started

    Remove the packaging from the blinds, being careful not to damage the material. Once they are unpacked, check that all parts are included:

    • The number of blinds ordered
    • Adhesive backing on the top of each blind
    • 2 clips

  2. Step 1

    Measure the width and height of the inside of your window frame. Transfer the measurements onto the temporary paper blind, excluding the fold with the adhesive backing. If the blinds already fit your window, you can go directly to Step 3.

  3. Step 2

    Once you’ve transferred the measurements (width and height) onto the blinds, trim them to size using sharp, clean scissors. Before cutting, double-check that the fold with the adhesive backing is not part of the excess material you’re removing.

  4. Step 3

    Peel off the protective film from the adhesive backing.

    Tip

    Wipe the surface of the window frame clean before installing blind.

  5. Step 4

    Press the temporary paper blinds onto the top of the window frame to secure them in place. Adjust the opening of your temporary blinds using the two clips.

  6. Step 5

    Tip

    After installation, use the included clips to hold the blind open.